PDA

View Full Version : Show em if you got em!



Azdesertrat
05-20-2018, 12:11 PM
There hasnít been a knife post yes so Iíll start it out with a few I got recently.
Spyderco vallotton, zt301ts, and Esse 4. Sorry my pics suck but hey itís a start!
423

424

425

semperfisurveyor
05-20-2018, 12:22 PM
Medfordís and a Chris Reeve
429430

weenis
05-21-2018, 08:40 AM
Peter Rassanti Payson

https://i.imgur.com/uAoh3EB.png

Couple of NorthFields

https://i.imgur.com/TZtponz.png

Slysz Bowie

https://i.imgur.com/4C1OtOa.png

Chris Reeve Umnumzaan and Curtiss Custom Nano

https://i.imgur.com/ErTRf0o.png

Elephant Ivory Northwoods, GEC #15 with finger pull

https://i.imgur.com/eE0KCBr.png

Cannonball
05-21-2018, 09:08 AM
448

449

450

451

452

453

joeb1
05-21-2018, 02:09 PM
468

LField
05-21-2018, 06:15 PM
480 BOKER481 FIREBIRD482 AKC F-16483 S&W (USA) M&P 1600 / SW1300 scale release484 TIMBERLINE

LField
05-21-2018, 07:38 PM
485 RUIKE486487 JUNGLEE488 BOM KERSHAW BAD BLOOD489 KERSHAW

Boriqua
05-25-2018, 09:12 AM
A few of my favs

http://www.boriqualeather.com/stuff/knives/Henckels%20Slip%20joint.jpg

Dark brown bone
http://www.boriqualeather.com/stuff/knives/Slip%20joint%20dark%20brown%20bone.jpg

Light brown bone
http://www.boriqualeather.com/stuff/knives/slip%20joint%20light%20brown%20bone.jpg

One I have had forever .. hand forged with some nice details and takes a scalpel edge.
http://www.boriqualeather.com/stuff/knives/IMGP1917v1sm.jpg

http://www.boriqualeather.com/stuff/knives/IMGP1918v1.jpg

http://www.boriqualeather.com/stuff/knives/IMGP1915v1sm.jpg

weenis
05-25-2018, 09:22 AM
Those Russell Barlows are fire.

Boriqua
05-25-2018, 09:24 AM
This one isnt mine but its cool looking. I just shot the photos for a friend.

http://www.boriqualeather.com/stuff/knives/IMG_1733sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry4sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry1sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry2sm.jpg

Boriqua
05-25-2018, 10:28 AM
A few more laying about

http://www.boriqualeather.com/stuff/knives/kukri.JPG

http://www.boriqualeather.com/stuff/knives/kukri1.JPG

another forged piece .. this one of 52100 with a nice convex edge and maple grips
http://www.boriqualeather.com/stuff/knives/maple%20knife.JPG

http://www.boriqualeather.com/stuff/knives/maple%20knife1.JPG

This is a newer acquisition and is quickly becoming one of my favorite EDC and do all knives
http://www.boriqualeather.com/stuff/knives/trek.JPG

This one has an interesting story. A friend of mine found it in a barn or shop .. and it was blade down in a bucket of something for years. There was heavy drinking so I cant remember the whole story. Anyway he gave it to me and it had some scaling at the edge so that needed to be sharpened away and I then cleaned off all the surface rust and discovered it had an awesome patina under it. I loved it so instead of removing it I cleaned it up and sealed it in multiple coats of renwax. I sanded down the handles but didnt want to remove all the scars and then stained it with some leather dye and finished it up with tung oil. Its a beast at 12 inches and nice edge.

http://www.boriqualeather.com/stuff/knives/dexter.JPG

And then my boring EDC for about 19 years now
http://www.boriqualeather.com/stuff/knives/sebenza.JPG

weenis
05-25-2018, 10:47 AM
Ohhhh nice. BG42.

Boriqua
05-25-2018, 11:00 AM
Ohhhh nice. BG42.

I had a bg42 for a little over a year or so and for whatever reason it was chippy as hell. I didnt think I was putting to shallow an angle .. probably about 22 degrees when I sharpened it or there abouts but ... it was a chippy blade. I wrote to them and in 2003 they asked me to send it in. I did and they sent me a brand new sebenza in S30V and that is the one I have carried and used ever since. I dont baby it and it has been duct taped to poles to cut things 10 feet up and I used to work in fabrications shop way back and it did it all. Opened many a paint can with the spine. Still .. If I cleaned it up you would swear it was new. Sometimes it pays to spend a little more. I actually just found the card that comes with them so my estimate was off and this one has only been with me for about 15 yrs.

Larry D.
05-25-2018, 11:03 AM
That chef's knife was tip down in a horse barn.
The property owner had lived there for ten plus years and told me that he had never even noticed it.
As stated, it was tip down, about half buried, right next to the door on the inside of the barn. It was pure accident that I saw it as it was behind an old wooden milk crate. I was trying to talk him out of the crate and picked it up to inspect it and there was this awesome piece of carbon steel that was in desperate need of rescue. The property owner gave me the crate and the knife just to get them out of his barn.
It was a bit of a project for me. All I really did was knock off the bad rust and re-profile the edge as about 3/4 of an inch of the tip was gone.
I made the mistake of showing it to Boriqua and the rest is history.

By the way, you should show something for scale. This is not a small knife.

weenis
05-25-2018, 11:13 AM
I had a bg42 for a little over a year or so and for whatever reason it was chippy as hell. I didnt think I was putting to shallow an angle .. probably about 22 degrees when I sharpened it or there abouts but ... it was a chippy blade. I wrote to them and in 2003 they asked me to send it in. I did and they sent me a brand new sebenza in S30V and that is the one I have carried and used ever since. I dont baby it and it has been duct taped to poles to cut things 10 feet up and I used to work in fabrications shop way back and it did it all. Opened many a paint can with the spine. Still .. If I cleaned it up you would swear it was new. Sometimes it pays to spend a little more. I actually just found the card that comes with them so my estimate was off and this one has only been with me for about 15 yrs.
That's awesome.

I agree, spend a little more on the knife, and it will generally reward you back.

Boriqua
05-25-2018, 11:35 AM
By the way, you should show something for scale. This is not a small knife.

The blade is 12"

http://www.boriqualeather.com/stuff/knives/DSCF8985sm.JPG

LField
05-31-2018, 04:23 PM
................................x669

LField
06-02-2018, 05:51 PM
got this one today in the mail (Boker KAL for size comparison)692693
this one is the oldest knife I own , not really worth anything , but grandma gave it to me when I was 10 (Colonial)694

SatCong
06-02-2018, 06:10 PM
This one isnt mine but its cool looking. I just shot the photos for a friend.

http://www.boriqualeather.com/stuff/knives/IMG_1733sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry4sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry1sm.jpg

http://www.boriqualeather.com/stuff/knives/4larry2sm.jpg It's Nazi Youth Dagger.

Larry D.
06-03-2018, 10:49 AM
Actually, it an SA dagger.
http://arms2armor.com/Knives/nazisad1.htm

Flash
06-10-2018, 11:33 AM
798

Hankins
06-12-2018, 07:26 PM
824
Yeah I made that and this one too!
825

semperfisurveyor
06-13-2018, 10:08 AM
Nice work Hankins!

Nice looking blades!!

Boriqua
06-13-2018, 03:12 PM
I have seen his work on another forum and its pretty damn sweet.

Hankins .. post your pinterest page. I dont have the link anymore..

That Randall style (top pic) in your post is supremely bad ass. Cant blow up the pic. Is it a leather handle or ....

Hankins
06-14-2018, 04:36 PM
Regards Gentlemen...
Both have solid G10 handles with D2 blades. Got out of the Knifemaking gig about around two years ago and getting the "Itch"
So much fun and I miss it, If you go to Google Images and look up Hankins Knife there are a few pics there, be aware there is others work there as well.
I will take some time and create a new Pinterest or some other hosting site with a bunch of my stuff that is not shown.
SUGESTIONS!!! on an easy to use pic/video hosting site that is easy for everyone to access?
I have around 5 new designs floating around my cranium and DXF files for a line of Balisongs.

LField
09-19-2018, 07:18 PM
got a couple of new ones ;)2022

weenis
09-21-2018, 01:08 PM
My new one-

https://i.imgur.com/kX5LiJ7.png

Boriqua
09-21-2018, 01:25 PM
My new one-

https://i.imgur.com/kX5LiJ7.png

That is pretty sweat .. what kind of lock up?

weenis
09-21-2018, 02:54 PM
It's kind of a frame lock. It's a frame lock, designed like a liner lock (kinda?) with a lock bar stabilizer.

It's a Shirogorov F3, full CF, with a titanium backspacer. Blade steel is M390, and it's one of the earlier serial number versions. It's a multi-bearing system, smooth as butter. Very solid lockup. I'm liking it a lot.

LField
12-23-2018, 08:56 PM
crappy pic , my stupid computer died
Ruike P121 & Boker KAL74 desert tan / dagger2601

jrleen
12-26-2018, 10:16 AM
Never really had a nice knife before, son got this for me.

weenis
12-26-2018, 10:36 AM
Nice knife.

Now flip that clip to tip up carry.

Boriqua
12-26-2018, 11:30 AM
Never really had a nice knife before, son got this for me.

Damn .. as a first nice knife or your 10th .. that bad boy is sweet!

thom
02-03-2019, 06:47 AM
These are over 10 years old, used primarily for scuba diving. The are H2s.

LField
02-22-2020, 06:53 PM
This thread is lacking , my new AKC Xtreme Ace.
3838

Larry D.
02-23-2020, 09:28 AM
Sweet.
Love me some auto's.

LField
03-03-2020, 10:35 PM
A couple of new ones, CH & Stedemon.3856

LField
03-12-2020, 04:26 PM
Just opened the mail ��3887
CJRB Briar and 2 AKC F-16ís

DuneShoot
03-12-2020, 07:44 PM
Few Spyderco's and a DPX Ti.
Thinking of letting go of the DPX.

3895
3896

LField
08-12-2020, 08:18 PM
I just got the latest, biggest Boker Kalashnikov , this thing is ridiculous. D2 steel and a 4.75” blade.Standard KAL74 for comparison.444644474448

LField
09-16-2020, 07:39 PM
Civivi Asticus arrived this afternoon 45264527

Larry D.
09-17-2020, 07:16 AM
Nice lines.
Looks great.

LField
12-26-2020, 09:37 AM
A few more got added to the fold48334834
Artisan Cutlery Waistline , Bestech Swordfish & Kubey Raven

LField
06-21-2021, 03:55 PM
Just got this for Father’s Day , Daggerr Kwaiggerr Russia , my first commie knife ��50385039

Larry D.
06-25-2021, 11:36 PM
Just got this for Father’s Day , Daggerr Kwaiggerr Russia , my first commie knife

That's kind of slick.

kenpoprofessor
06-26-2021, 12:40 PM
I collect knives, well, kinda. I like cheap ones that are really sharp and handle well. When it comes times to use it, I don't mind losing a $5-$15 blade after it does it's one time job.

LField
11-07-2021, 06:29 PM
I got a few more since June , CH3017 (front flipper) CJRB Centros and a Steel Will Intrigue 51995200

LField
01-15-2022, 01:42 PM
Got some more for Christmas , Harnds Assassin , QSP Gavial , TwoSun TS159-M and Y-Start LK5014 (titanium frame lock)52165217